Building Aero 3D

Today I made some more progress on the fuselage of the aircraft. I started by cutting, from 1/4″ x 1/4″ balsa stringer, two pieces for cross braces in former 7 which was 21⁄16” and in former 8 which was 15⁄16“. Once cut I used medium CA, placed on the ends of the balsa and top […]

Winter is upon us again… that means it is back to building season! This build is going to take on a bit of a different dynamic as a big thank-you goes out to Peter & John for helping me build a workbench in our mudroom. I’m excited to be able to go at my own