Building Seamaster Day 24: Stab + Front Top Plate Glued

On May 16th I did the final prep on the stab and also sanded the front top plate which were then glued and clamped into place.

Stab & Front Top Plate Glued (Close up)
Stab & Front Top Plate Glued (Close up)

The stabilizer was glued to the top of the fin and triangle stock which was previously glued into place.  Once this was done we left the aircraft alone for the glue to set.

Stab & Front Top Plate Glued
Stab & Front Top Plate Glued

Leave a Reply

Your email address will not be published. Required fields are marked *