On May 27th I saw some of the work Peter had done on the aircraft and put in some of my own work. Peter had the keel glued to bottom of fuselage, seen above as well as the balsa blocks for the engine mount in place and formed with paste applied to fill the gaps. […]
Building Seamaster Day 25: Balsa blocks, keel, etc. Read More »
On May 16th I did the final prep on the stab and also sanded the front top plate which were then glued and clamped into place. The stabilizer was glued to the top of the fin and triangle stock which was previously glued into place. Once this was done we left the aircraft alone for
Building Seamaster Day 24: Stab + Front Top Plate Glued Read More »
On May 12th I worked on the tail of the aircraft. The first task was to sand and form/tapper the bottom triangle stock supporting the bottom of the tail fin and for aerodynamics, seen above. The next task for the day was getting the triangle stock in place flush with the top of the fin
Building Seamaster Day 23: Tail Fin Read More »
