Being Family Day in Ontario I got over for an afternoon building session with Peter. I started off where I left off, the rudder. I used the heat gun to shrink the covering over the ‘holes’ in the rudder and then using the markings on the fin figured out where the hinge marks were hiding
Building 4 Star 60 Day 35: Tail Covering Started Read More »
It was great to get back working on my aircraft after a 16 day hiatus due to being away for birthday weekends amongst other things. Though I wasn’t able to make it Peter did tinker a bit as he got the engine mounted, fuel tank set up and the throttle connections hooked up. I forgot
Building 4 Star 60 Day 34: Covering Rudder + Hole Made Read More »
I was introduced to the board & card game combo Dirty Marbles years ago by friends of the family. Being a lover of board and card games I fell in love with the game almost instantly. The game is played using a board similar to the one displayed at the end of this post and a regular deck
Dirty Marbles: A Board & Card Game Read More »
Last Tuesday I got to work on my plane again and been so busy since I’m only now getting around to blogging about it. The first thing we did was install the wire for the tail wheel. This involved first bending the tip of the wire into a 90 degree angle and ‘sanding’ the wire
Building 4 Star 60 Day 33: Tail Wheel & Invasion Stripes Read More »
Saturday I got over to Peter’s for another building session. We started by going over what Peter had done. In order to not ‘waste’ my time on some of the easy but tedious stuff Peter will do some of it for me when he has a chance so that those things don’t hold us up
Building 4 Star 60 Day 32: Hinged Ailerons + Tail Touch Ups Read More »
Tuesday I was able to get in some more covering and visiting. I started by covering the ailerons, which as you can see from the pic above I did in green. Kevin stopped by for a visit to see how things were going and a bit of a chat. It is nice to see guys
Building 4 Star 60 Day 31: Ailerons & Servo Hatches Covered Read More »
Saturday was another great building session. John stopped by for a visit to check out how things were coming along and contrary to the ‘hack’ job he voices I believe he thinks I’m doing a pretty decent job :). Thanks to Peter for trimming off the excess of the top left covering I didn’t have
Building 4 Star 60 Day 30: Left/Center Top Wing Covered + Ailerons Read More »
Tuesday I was able to work on my plane for a couple hours. Prior to covering the top of the wing I needed to cut the covering that was over the servo hatches. After cutting the covering into an ‘X’, corner to corner, I turned the wing back around and ensured that the covering is
Building 4 Star 60 Day 29: Wing Servo Hatches Exposed + Top Covering Read More »
